Bora 8×170 vs 8×180 Wheel Spacers: Which Ford Bolt Pattern Fits Your Truck?
Ford Super Duty owners and Chevy/GMC HD truck drivers both shop for heavy-duty wheel spacers, but the two platforms use completely different bolt patterns—8×170 for Ford and 8×180 for GM. Mixing them up can mean ordering the wrong part, installing it anyway and risking wheel wobble or stud damage, or returning a product that looked identical in photos.
We built Bora spacers for both patterns, and we still field weekly questions about which is which. This guide walks through how to tell 8×170 from 8×180, which trucks use each pattern, what happens if you guess wrong, and how to measure your hub before ordering.

Which Trucks Use 8×170 vs 8×180 Bolt Patterns?
Ford Super Duty trucks—F-250, F-350, and F-450—switched to the 8×170 bolt pattern in 1999 and have kept it ever since. If you drive a 1999-or-later Super Duty, you need 8×170 spacers.
The 8×180 pattern belongs to heavy-duty GM trucks: 2011-and-later Chevy Silverado 2500/3500 and GMC Sierra 2500/3500. Older GM trucks (pre-2011) used 8×6.5-inch, which is 8×165.1 in metric—completely different from both 8×170 and 8×180. If you’re cross-shopping Bora 8×170 vs 8×6.5 wheel spacers for older GM or Ford platforms, the diameter difference is even larger and immediately obvious during fitment.
What the Numbers Mean
8×170 means eight lug holes arranged on a 170-millimeter diameter circle. 8×180 means eight holes on a 180 mm circle. The 10 mm diameter difference sounds tiny, but it shifts every stud position enough that the holes will not align—one pattern’s studs land between the other pattern’s holes.
How to Measure Your Bolt Pattern Before Ordering
The most reliable method is to measure center-to-center across the hub. On an eight-lug wheel, pick any stud and measure straight across to the stud directly opposite it—that’s the bolt circle diameter.
If your tape shows 6.69 inches (170 mm), you have 8×170. If it reads 7.09 inches (180 mm), you have 8×180. Calipers give a cleaner reading than a cloth tape, especially when the hub face is dirty or the studs are recessed.
Why Not Just Check the Door Jamb Sticker?
The door jamb lists tire size and load rating but almost never states bolt pattern in metric. Ford stamps “8-LUG” on many Super Duty stickers without specifying 170 mm, and GM does the same. If you’ve swapped wheels or hubs during the truck’s life, the sticker may not even match what’s installed now.
What Happens If You Install the Wrong Pattern?
If you force an 8×170 spacer onto an 8×180 hub—or vice versa—a few of the eight studs might catch threads, but most will be misaligned. The spacer will feel like it’s “almost” fitting, and you might get three or four lug nuts to start threading.
Running the truck with only partial engagement creates uneven clamping force. The engaged studs carry all the load, the wheel tilts slightly on the hub face, and vibration at highway speed is immediate. Worse, the misaligned studs can cross-thread, mushroom the stud tip, or crack the spacer’s stud holes if you torque them hard enough to pull the wheel flush.
Thread Pitch Is Identical
Both 8×170 and 8×180 use M14x1.5 studs, so a lug nut will thread onto either stud type. That’s why the mistake isn’t caught until you notice the pattern diameter mismatch—the threads themselves don’t warn you.

Ordering the Correct Bora Spacer for Your Pattern
Our Bora 8×180 wheel spacers are machined specifically for the 180 mm bolt circle and ship with M14x1.5 studs pressed to the correct spacing for 2011+ GM heavy-duty trucks. The Bora 2-inch wheel spacers in 8×180 use the same bolt circle but add width for aggressive tire fitment or brake caliper clearance.
For Ford Super Duty, the 8×170 version carries the same forged-aluminum construction and stud grade but with holes drilled on the 170 mm circle. Mixing the two part numbers will result in a return, so double-check your measurement or VIN before adding to cart.
Thickness and Offset
Both patterns are available in 1.5-inch and 2-inch thicknesses. Thickness affects how far the wheel moves outboard, which changes scrub radius and can alter steering feel—but it doesn’t change bolt pattern compatibility. A 2-inch 8×170 spacer still only fits 8×170 hubs, regardless of wheel offset.

Why the Two Patterns Exist at All
Ford adopted 8×170 in 1999 to increase stud engagement area and improve clamping strength on Super Duty trucks rated for higher payload and towing than the F-150. GM introduced 8×180 in 2011 for similar reasons when the GMT900 platform gave way to the GMT K2XX generation of Silverado and Sierra HD models.
Neither manufacturer coordinated with the other, so the patterns remain incompatible by design. According to the SAE J694 standard for wheel bolt patterns, bolt circle diameter is specified to within ±0.5 mm, meaning the 10 mm gap between 8×170 and 8×180 is intentional and cannot be bridged with adapters or oversized holes.
Aftermarket Wheel Compatibility
Most aftermarket wheel manufacturers label their products as “8×170 Ford” or “8×180 GM” rather than listing the millimeter measurement alone. If you already own wheels drilled for one pattern and want to use them on the other truck, the only option is a bolt-pattern conversion adapter—a thick spacer with 8×170 on one face and 8×180 on the other. We don’t recommend conversion adapters for daily driving because they add significant unsprung weight and move the wheel even farther outboard than a standard spacer.
Confirming Your Bolt Pattern Before You Order
The difference between 8×170 and 8×180 is only 10 millimeters, but that’s enough to make the parts completely incompatible. Measure your hub center-to-center, verify your truck’s year and model, and order the spacer that matches.
If you’re still unsure after measuring, snap a photo of your hub with a tape across the studs and email it to our team—we’d rather confirm the pattern before you order than process a return after the fact. Both patterns use the same forged-aluminum construction and M14x1.5 studs, so the only variable is getting the bolt circle diameter right.
Common Questions About 8×170 and 8×180 Bolt Patterns
No. Ford Super Duty uses 8×170, and GM HD trucks use 8×180. The 10 mm difference in bolt circle diameter means the stud holes will not align. You need separate spacers for each pattern.
Wheel spacers themselves typically don’t void a factory powertrain warranty, but if a suspension or drivetrain failure is linked to improper wheel fitment or incorrect bolt pattern, the manufacturer may deny that specific claim. Always torque lug nuts to spec and confirm the spacer matches your truck’s bolt pattern before installation.
Hub-centric spacers register on the hub’s center bore and reduce the chance of vibration, especially at highway speed. Lug-centric spacers rely solely on lug nut torque to center the wheel. Both work if installed correctly, but hub-centric designs are easier to align during installation and less sensitive to torque variations.
Yes, but it’s harder. You’ll need to measure from the back face of one stud to the front face of the stud directly across, then add the stud diameter to get true center-to-center. Removing the wheel and measuring center-to-center across exposed studs is faster and more accurate.
A few studs may catch threads, but most will be misaligned. The wheel will wobble, lug nuts will torque unevenly, and you risk cross-threading or cracking the spacer. Remove the spacer immediately and order the correct 8×180 version.
No. Ford Super Duty has used 8×170 exclusively since 1999. GM HD trucks switched from 8×6.5 to 8×180 in 2011 and have stayed with 8×180 since. If you own a truck from a different year or trim, check the bolt pattern by measurement rather than assumption.
